function dw(message) { document.write(message); } //Top Menu tm01="Linksys Wireless-G PTZ Internet Camera with Audio"; tm02="Home"; tm03="View Video"; tm04="Setup"; tm05="Linksys Web"; tm06="Help"; tm07="Exit"; tm08="Copyright 2007 Cisco Systems, Inc. All rights reserved."; tm09="Connected Users:"; tm090="Connected User:"; tm10="Image Resolution"; tm11="Preset Camera View"; tm12="Please Log In"; tm13="Username:"; tm14="Password:"; //Left Menu lm01="Setup"; lm02="Basic"; lm03="Audio/Video"; lm04="Maintenance"; lm05="Users"; lm06="DDNS"; lm07="Mail & FTP"; lm08="Motion Detection"; lm09="Pan/Tilt"; lm10="Status"; // lm11="Setup - Basic"; lm12="Setup - Audio/Video"; lm13="Setup - Maintenance"; lm14="Setup - Users"; lm15="Setup - DDNS"; lm16="Setup - Mail & FTP"; lm17="Setup - Motion Detection"; lm18="Setup - Pan/Tilt"; lm19="Setup - Status"; //Buttons bt01="Apply"; bt02="Cancel"; bt03="Help"; bt04="Continue"; bt05="Back"; bt06="Refresh"; bt07="Submit"; bt08="Remove"; bt09="Delete"; bt10="Add »"; bt11="Reset"; bt12="Generate"; // bt13="Change"; bt14="Clear Log"; bt15="Web Site"; // bt16="Sync with PC"; bt17="Edit Security Settings"; bt18="Update Now"; bt19="DDNS Account"; bt20="Remove Camera"; bt21="Restore Defaults"; bt22="Upgrade Firmware"; bt23="Start Upgrade"; bt24="Set Area & Sensitivity"; bt25="Add"; bt26="OK"; bt27="Close"; bt28="Calibration"; bt29="Set Home"; bt30="Restart"; bt31="Save Configuration"; bt32="Set New Time"; bt33="Upload Configuration"; // bt_zoom="Zoom Camera"; bt_snap="Snap Shot"; bt_sm="Streaming Mode"; bt_dir="On-image PT Control"; bt_flip="Flip Video"; bt_mir="Mirror Video"; bt_aud="Sound On/Off"; bt_audup="Audio Upload On/Off"; bt_pat="Camera Patrol"; bt_pan="Camera Auto Pan"; bt_md="Motion Detection"; //PT List pt_list="None"; //Admin Help hav001="Administrator Help"; hav002="Linksys Support Page - Download Latest Viewer/Recorder Utility"; hav003="Click here to learn how to configure Port Forwarding in your Linksys Router"; hav004="Adobe website (software for viewing PDF documents)"; /////////////////////////////////////////////////////// /* - Config UI Display Content - */ //basic.htm bv001="Basic Settings"; bv002="Device Settings"; bv003="Network Settings"; bv004="Wireless Settings"; bv0040="RTSP / RTP"; // bv005="Device ID:"; bv006="Camera Name:"; bv007="Description:"; bv008="Enable LCD and LED Operations"; bv009="Current Date/Time:"; bv010="Time Zone:"; bv011="Adjust for Daylight Saving Time"; // bv012="(GMT-12:00) International Date Line West"; bv013="(GMT-11:00) Midway Island, Samoa"; bv014="(GMT-10:00) Hawaii"; bv015="(GMT-09:00) Alaska"; bv016="(GMT-08:00) Pacific Time (US & Canada); Tijuana"; bv017="(GMT-07:00) Arizona"; bv018="(GMT-07:00) Chihuahua, La Paz, Mazatlan"; bv019="(GMT-07:00) Mountain Time (US & Canada)"; bv020="(GMT-06:00) Central America"; bv021="(GMT-06:00) Central Time (US & Canda)"; bv022="(GMT-06:00) Guadalajara, Mexico City,Monterrey"; bv023="(GMT-06:00) Saskatchewan"; bv024="(GMT-05:00) Bogota, Lima, Quito"; bv025="(GMT-05:00) Eastern Time (US & Canda)"; bv026="(GMT-05:00) Indiana (East)"; bv027="(GMT-04:00) Atlantic Time (Canada)"; bv028="(GMT-04:00) La Paz"; bv029="(GMT-04:00) Santiago"; bv030="(GMT-03:30) Newfoundland"; bv031="(GMT-03:00) Brasilia"; bv032="(GMT-03:00) Buenos Aires, Georgetown"; bv033="(GMT-03:00) Greenland"; bv034="(GMT-02:00) Mid-Atlantic"; bv035="(GMT-01:00) Azores"; bv036="(GMT-01:00) Cape Verde Is."; bv037="(GMT) Casablanca, Monrovia"; bv038="(GMT) Greenwich Mean Time: Dublin,Edinburgh,Lisbon,London"; bv039="(GMT+01:00) Amsterdam, Berlin,Bern,Rome,Stockholm,Vienna"; bv040="(GMT+01:00) Belgrade, Bratislava,Budapest,Ljubljana,Prague"; bv041="(GMT+01:00) Brussels, Copenhagen, Madrid, Paris"; bv042="(GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb"; bv043="(GMT+01:00) West Central Africa"; bv044="(GMT+02:00) Athens, Istanbul, Minsk"; bv045="(GMT+02:00) Bucharest"; bv046="(GMT+02:00) Cairo"; bv047="(GMT+02:00) Harare, Pretoria"; bv048="(GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius"; bv049="(GMT+02:00) Jerusalem"; bv050="(GMT+03:00) Baghdad"; bv051="(GMT+03:00) Kuwait, Riyadh"; bv052="(GMT+03:00) Moscow, St. Petersburg, Volgograd"; bv053="(GMT+03:00) Nairobi"; bv054="(GMT+03:30) Tehran"; bv055="(GMT+04:00) Abu Dhabi, Muscat"; bv056="(GMT+04:00) Baku, Tbilisi, Yerevan"; bv057="(GMT+04:30) Kabul"; bv058="(GMT+05:00) Ekaterinburg"; bv059="(GMT+05:00) Islamabad, Karachi, Tashkent"; bv060="(GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi"; bv061="(GMT+05:45) Kathmandu"; bv062="(GMT+06:00) Almaty, Novosibirsk"; bv063="(GMT+06:00) Astana, Dhaka"; bv064="(GMT+06:00) Sri Jayawardenepura"; bv065="(GMT+06:30) Rangoon"; bv066="(GMT+07:00) Bangkok, Hanoi, Jakarta"; bv067="(GMT+07:00) Krasnoyarsk"; bv068="(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi"; bv069="(GMT+08:00) Irkutsk, Ulaan Bataar"; bv070="(GMT+08:00) Kuala Lumpur, Singapore"; bv071="(GMT+08:00) Perth"; bv072="(GMT+08:00) Taipei"; bv073="(GMT+09:00) Osaka, Sapporo, Tokyo"; bv074="(GMT+09:00) Seoul"; bv075="(GMT+09:00) Yakutsk"; bv076="(GMT+09:30) Adelaide"; bv077="(GMT+09:30) Darwin"; bv078="(GMT+10:00) Brisbane"; bv079="(GMT+10:00) Canberra, Melbourne, Sydney"; bv080="(GMT+10:00) Guam, Port Moresby"; bv081="(GMT+10:00) Hobart"; bv082="(GMT+10:00) Vladivostok"; bv083="(GMT+11:00) Magadan, Solomon Is., New Caledonia"; bv084="(GMT+12:00) Auckland, Wellington"; bv085="(GMT+12:00) Fiji, Kamchatka, Marshall Is."; bv086="(GMT+13:00) Nuku'alofa"; // bv087="Configuration Type:"; bv088="Obtain Address Automatically (DHCP)"; bv089="Fixed IP Address"; bv090="IP Address:"; bv091="Subnet Mask:"; bv092="Gateway:"; bv093="Primary DNS:"; bv094="Secondary DNS:"; // bv095="SSID:"; bv096="Network Type:"; bv097="Channel No:"; bv0970="RTSP Port:"; bv0971="RTP Data Port:"; bv0972="(Mobile Phone Only)"; bv0973="Max RTP Data Packet:"; bv0974="bytes"; bv0975="Enable Multicast"; bv09750="Group Name:"; bv0976="Video Address:"; bv0977="Video Port:"; bv0978="(Even Value, 1024-65534)"; bv0979="Audio Address:"; bv09710="Audio Port:"; bv09711="(Even Value, 1024-65534)"; bv09712="Time to Live:"; bv09713="(Hops, 1~255)"; bv098="Security:"; bv099="Ad-hoc"; bv100="Infrastructure"; bv101="Check here if you want to update the time automatically through the NTP server from the Internet."; bv102="NTP Server Address:"; bv103="(GMT-04:30) Caracas"; // //Wsecurity.htm bwv001="Wireless Security"; bwv002="Security Mode:"; bwv003="WPA Personal"; bwv0030="WPA2 Personal"; bwv004="TX Key:"; bwv005="WEP Encryption:"; bwv006="64 Bit Keys (10 Hex chars)"; bwv007="128 Bit Keys (26 Hex chars)"; bwv008="Passphrase:"; bwv009="Authentication:"; bwv010="Open System"; bwv0100="Shared Key"; bwv011="Shared Key:"; bwv0110="Key Renewal Timeout:"; bwv0111="Second(s)"; bwv012="Encryption:"; bwv013="(8 to 63 characters)"; bwv014="Key 1:"; bwv015="Key 2:"; bwv016="Key 3:"; bwv017="Key 4:"; bwv018="Disable"; bwv019="WEP"; // //sys_time.htm btv001="Set Date/Time"; btv002="PC's Date & Time:"; btv003="Camera Date & Time:"; btv004="New Date:"; btv005="New Time:"; btv006="(hh:mm:ss)"; //ddns.htm dv001="DDNS Settings"; dv002="DDNS"; dv003="Status"; dv004="Use this screen to setup and manage your"; dv005="Linksys DDNS Service"; dv006="Register today for your 90 days free trial period! If you are adding additional devices to your DDNS service,"; dv007="Register today for your 1 year free trial period! If you are adding additional devices to your DDNS service,"; dv008="click here"; dv009="for more information."; // dv010="Username:"; dv011="Password:"; dv012="New User? - Click here to Register"; dv013="Forgot your Password?"; dv014="Your Domain:"; dv015="ex: jdoe.ourlinksys.com"; dv016="Device Name:"; dv017="WAN Port:"; dv018="DDNS Service Update:"; dv019="Find Available Port"; // dv020="Registration Status:"; dv021="Address Update Status:"; dv022="Last Update Attempt:"; dv023="Last Successful Update:"; dv024="Options:"; dv025="(Remove camera from Domain service.)"; // dv026="Enable DDNS"; dv027="Service Provider:"; dv029="DynDNS"; dv030="TZO"; dv0301="FreeDNS"; dv031="DDNS Service"; dv032="Host Name:"; dv033="Account:"; dv034="Check WAN IP Address:"; dv035="starting at"; dv036="(hh:mm)"; // vv003="Every"; vv004="Minute(s)"; vv005="Hour"; vv006="Hour(s)"; //ftp.htm fv001="Mail & FTP"; fv002="FTP Alert"; fv003="Primary FTP"; fv004="FTP Server:"; fv005="Port:"; fv006="Login Name:"; fv007="Password:"; fv008="Enable Passive Mode"; fv009="File Path Name:"; fv010="Upload to the secondary FTP if the camera can not connect to the primary FTP."; fv011="Secondary FTP"; fv012="FTP Server:"; fv013="Port:"; fv014="Login Name:"; fv015="Password:"; fv016="Enable Passive Mode"; fv017="Attachment Type:"; fv018="JPEG Image"; fv019="Video"; fv020="Interval:"; fv021="AVI"; fv022="MP4 (no audio)"; fv023="3GP (no audio)"; fv024="Pre-Capture Length:"; fv025="Post-Capture Length:"; fv026="Primary"; fv027="Secondary"; fv028="SMTP"; fv029="Upload to the secondary SMTP if the camera can not connect to the primary SMTP."; //image.htm iv001="Audio/Video Settings"; iv002="MPEG-4 Settings"; iv003="MJPEG Settings"; iv0030="Fixed Video Quality:"; iv0031="Frame Rate Control:"; iv00m0="Mobile Settings"; iv00m1="Enable Mobile Streaming"; iv00m2="Access Code:"; iv004="Resolution:"; iv005="Video Quality Control:"; iv006="Fixed Bit Rate"; iv0060="1.2 Mb/s"; iv007="Fixed Quality"; iv008="Very High"; iv009="High"; iv010="Normal"; iv011="Low"; iv012="Very Low"; iv013="Max Frame Rate:"; iv0130="f/s"; iv014="Power Line Frequency:"; iv015="(for fluorescent lighting)"; iv016="Adjustments"; iv017="Color Balance:"; iv018="Auto"; iv019="Indoor (Incandescent)"; iv020="Fluorescent (white light)"; iv021="Fluorescent (yellow light)"; iv022="Outdoor"; iv023="Black & White"; iv024="Exposure:"; iv025="Sharpness:"; iv026="Video Options"; iv0261="Audio Options"; iv027="Flip Image"; iv028="Mirror Image"; iv029="Enable Microphone"; iv0290="Enable Speaker"; iv030="Enable Time Stamp"; iv031="Enable Text Display"; iv032="Simplex - Listen Only "; iv033=" Simplex - Talk Only "; iv034=" Half Duplex - Talk or Listen (Not simultaneously)"; iv035="Full Duplex - Talk and Listen (Can be simultaneously)"; iv036="Audio Type:"; iv037="G.711 A-Law"; iv038="G.711 u-Law"; iv039="Enable Audio"; //options.htm ov001="Event"; ov002="E-mail Alert"; ov003="Enable E-mail Alert"; ov004="(Send E-Mail Alert when Motion Detected)"; ov005="(Before the Alert takes effect, please complete the Mail & FTP setting first.)"; ov006="Send To:"; ov007="(E-mail Address #1)"; ov008="(E-mail Address #2)"; ov009="(E-mail Address #3)"; ov010='Show "From" as:'; ov011="(E-mail Address)"; ov012="Subject:"; ov013="SMTP Mail Server:"; ov014="(Outgoing Mail Server)"; ov015="My Mail Server Requires Authentication"; ov016="Account Name:"; ov017="Password:"; ov018="Pan/Tilt:"; ov0190="Enable Motion Detection in all position"; ov019="Disable Pan/Tilt while Motion Detection is enabled"; ov020="Disable Motion Detection while position is incorrect"; ov021="Go to Motion Detection position if idle"; ov022="before detecting the next event."; ov023="Video Format (MPEG-4):"; ov024="(Send FTP Alert when Motion Detected)"; ov025="Set Area & Sensitivity"; ov026="Frame Rate:"; ov027="Second(s)"; ov028="fps"; ov029="Other"; ov030="Enable UPnP"; ov031="(Discovery Only)"; ov032="Enable Alternate Port"; ov033="(For HTTP/Web connections)"; ov034="Port Number:"; ov0340="Enable QoS Mode"; ov0341="Audio"; ov0342="Video"; ov0343="DSCP:"; // //m_detect.htm ov035="Indicator"; ov036="Threshold"; ov037="Full Screen"; ov038="Setting Custom Area"; //pan_tilt.htm ptv001="Pan/Tilt Settings"; ptv002="Set Preset"; ptv003="Current Position:"; ptv004="Preset Position:"; ptv005="Pan/Tilt Control"; ptv006="Pan/Tilt Movement:"; ptv007="Default Home Position:"; ptv008="Rotation Sequence"; ptv009="Preset"; ptv010="Time"; ptv011="Sequence"; ptv012="On"; ptv013="Off"; // //presets.htm ptv014="Set Preset Position"; ptv015="Save Current Position as Preset"; ptv016="Preset No:"; ptv017="Preset Name:"; //pass_wd.htm pv001="Maintenance"; pv002="Restore Factory Defaults"; pv003="Caution:"; pv004="Any settings you have saved will be lost when the default settings are restored."; pv005="Restart"; pv006="Firmware Upgrade"; pv007="Firmware:"; pv008="Configuration"; // pv009="English"; pv010="Spanish"; pv011="German"; pv012="French"; pv013="Italian"; pv014="Portuguese"; pv015="Language"; // pv_lang_list_0000="English" pv_lang_list_0001="English-Europe" pv_lang_list_0002="French" pv_lang_list_0003="German" pv_lang_list_0004="Swedish_SE" pv_lang_list_0005="Spanish" pv_lang_list_0006="Italian" pv_lang_list_0007="Portugal" pv_lang_list_0008="Denmark" pv_lang_list_0009="Dutch" pv_lang_list_0020="English" pv_lang_list_0021="Simplified Chinese" pv_lang_list_0022="Traditional Chinese" pv_lang_list_0023="Australia English" pv_lang_list_0024="Japanese" pv_lang_list_0025="Korean" //upg_fw.htm pfwv001="Upgrade Firmware"; pfwv002="The upgrade firmware file needs to be downloaded and stored on your PC."; pfwv003="Upgrade File:"; // //upg_pg.htm pgv001="Firmware Upgrade in Progress!"; pgv002="Please wait. This could take %s to %s minutes."; pgv003="Progress"; pgv004="Upgrade must NOT be interrupted!"; //user.htm rv001="Users Settings"; rv0010="Authentication"; rv0011="Enable Authentication Check"; rv002="Administrator"; rv003="Admin"; rv004="User List"; rv005="User ID"; rv006="User Name"; rv007="Password"; rv008="Confirm Password"; rv009="Pan/Tilt"; rv010="Setup"; rv011="User"; rv012="Demo"; rv013="Viewer"; //status.htm sv001="Status Settings"; sv002="System"; sv003="Firmware Version:"; sv004="MAC Address:"; sv005="Camera Name:"; sv006="Description:"; sv007="Date/Time:"; sv008="Image"; sv009="MPEG-4"; sv010="Resolution:"; sv011="Image Quality:"; sv0110="Frame Rate:"; sv0111="MJPEG"; sv012="Network"; sv013="Network Type:"; sv014="IP Address:"; sv015="Subnet Mask:"; sv016="Gateway:"; sv017="Primary DNS:"; sv018="Secondary DNS:"; sv019="Wireless"; sv0190="Signal Strength:"; sv020="SSID:"; sv021="Channel:"; sv022="Security:"; sv023="Syslog"; sv024="Syslog Server:"; sv025="Log"; sv026="System Log:"; sv027="Wireless"; sv028="Ethernet"; sv029="N/A"; /////////////////////////////////////////////////////// /* - Help Content - */ // - Important: No translation on HTML Tags, sample list as below . . . . // HTML Tags: , , , , ",  , °,
,

,

, , , , , , , ,
  • ,
    • , 
    ,
    , //hlp_basic.htm hbh01="Help - Basic"; hbh02="Device Settings"; hbh03="Device ID"; hbh04="This displays the ID for the Wireless-G Internet Camera. This is used by the Setup Wizard and the Viewer and Recorder Utility to identify the Camera."; hbh05="Camera Name"; hbh06="Enter the preferred name for the Wireless-G Internet Camera. It must not exceed 16 alphanumeric characters."; hbh07="Description"; hbh08="This field is used for entering a description, such as the location of the Wireless-G Internet Camera. Entering a description will help you identify the Camera. It must not exceed 32 alphanumeric characters."; hbh09="LCD and LED Operation"; hbh10="Enable this if you want to turn on the LCD and LED."; hbh11="Current Date/Time"; hbh12="It displays the current date and time. If it's not correct, click the Change button to modify the time settings."; hbh13="Time Zone"; hbh14="Choose the time zone for your location from the drop-down list.
    If your location is currently using Daylight Saving Time, enable the Adjust for Daylight Saving Time checkbox. You must UN CHECK this checkbox when Daylight Saving Time finishes."; hbh15="Network Time Protocol (NTP)"; hbh16="Enable or disable the Time Server feature as required.
    If Enabled, the Wireless-G Internet Camera will contact a Network Time Server at regular intervals and update its internal timer."; hbh17="NTP Server"; hbh18="Enter the address of the NTP Server."; hbh19="Network Settings"; hbh20="Configuration Type"; hbh21="Select "Obtain Address Automatically (DHCP)" if your network has a DHCP server.
    If you choose "Fixed IP Address", you must configure the IP Address, Subnet Mask, Gateway and DNS."; hbh22="IP Address"; hbh22a="Assign an IP address that is unique to your local network. There's no need to purchase a separate IP address from your ISP."; hbh23="Subnet Mask"; hbh23a="The Subnet Mask (also known as IP Mask) must be the same as the Subnet Mask set on the other devices on your Ethernet (wired) network."; hbh24="Gateway"; hbh24a="Enter the IP address of your network's Gateway."; hbh25="DNS"; hbh25a="The Primary DNS address is required, while the Secondary DNS is optional. Use the same value(s) as the one(s) used by PCs on your LAN. Normally, your ISP will recommend a DNS."; hbh250="RTSP / RTP"; hbh251="RTSP Port"; hbh252="The RTSP (Real Time Streaming Protocol), a standard for connected client(s) to control streaming data (MPEG-4) over the World Wide Web.

    If desired to change, enter the RTSP Port number (between 1024 to 65535) in the field provided.   The default RTSP Port is 554."; hbh253="RTP Data Port"; hbh254="The RTP (Real-Time Transport Protocol), an Internet protocol used for transmitting a single real-time multimedia data such as audio and video to a select group of connected clients.   The RTSP uses RTP to format packets of multimedia content.

    The Wireless-G Internet Camera's data Port number has been pre-configured and can be used for multi casting, and does not normally need to be re-configured. If a port number does need to be changed, please contact your network administrator.

    If desired to change, enter the data Port number (between 1024 to 65534) in the field provided."; hbh255="Max RTP Data Packet"; hbh256="If desired to change, enter the Max RTP Data Packet Length (between 400 to 1400 bytes) in the field provided."; hbh257="Multicast Setup"; hbh2580="Group Name
    If Group Name does need to be changed, please contact your network administrator.
    If desired to change, enter the Group Name in the field provided."; hbh258="Video Address / Audio Address
    The Network Camera's Video and Audio IP Address has been pre-configured and can be used for multicasting, and does not normally need to be re-configured. If an address does need to be changed, please contact your network administrator.
    If desired to change, enter the Video Address / Audio Address in the field provided."; hbh259="Video Port / Audio Port
    The Network Camera's Video and Audio Port number has been pre-configured and can be used for multicasting, and does not normally need to be re-configured. If a port number does need to be changed, please contact your network administrator.
    If desired to change, enter the Video Port / Audio Port number (between 1024 to 65534) in the field provided.   The Video Port / Audio Port number you entered must be even values."; hbh2510="Time to Live
    Enter a reasonable length of time (usually measured in 'hops' - the number of network routers that can be passed before the multimedia data packets arrives at its destination or is dropped.), if the packets fail to be delivered to their destination within.   The Time to Live you entered must be in-between 1 to 255."; hbh26="Wireless Settings"; hbh27="SSID"; hbh28="The SSID is the network name shared among all devices in a wireless network. The SSID must be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32 alphanumeric characters, which may be any keyboard character. Make sure this setting is the same for all devices in your wireless network. For added security, Linksys recommends that you change the default SSID (linksys) to a unique name of your choice."; hbh29="Network Type"; hbh30="Select Infrastructure mode if you are connecting the Wireless-G Internet Video Camera to a network access point. Select Ad-Hoc mode if the Wireless-G Internet Camera  is connecting directly to a PC or notebook."; hbh31="Channel No"; hbh32="Select the appropriate channel from the list provided to correspond with your network settings, between 1 and 13 (in Europe). All devices in your wireless network must use the same channel in order to function correctly.
    Note: In Infrastructure mode, you cannot specify a channel setting on the Wireless-G Internet Camera. It will automatically be configured to the station you are connecting the Wireless-G Internet Camera to."; hbh33="Security"; hbh34="It displays the current security setting for Wireless connections.
    Click the Edit Security Settings button to configure the security settings."; hbh340="Security Mode"; hbh341="Select the desired option. All wireless clients must use the same settings as this device. There are three wireless security mode options supported by the device: Disabled, WEP, WPA Personal, and WPA2 Personal. These are explained below."; hbh342="Disabled"; hbh343="This option features no security on your wireless network. Data is not encrypted before transmission."; hbh344="WEP"; hbh345="WEP is a basic encryption method, which is not as secure as later methods such as WPA-Personal or WPA2 Personal. However, it is supported by all clients. If using WEP, select a level of WEP encryption, 64-bit or 128-bit. If you want to use a Passphrase, then enter it in the Passphrase field and click the Generate button. If you want to enter the WEP key manually, then enter it in the WEP Key 1-4 field(s). To indicate which WEP key to use, select the appropriate TX Key number."; hbh346="WPA Personal"; hbh347="(aka WPA-PSK)"; hbh348="This method offers two encryption methods, TKIP and AES (The default is TKIP), with dynamic encryption keys. Select the type of encryption method you want to use, TKIP or AES. Enter the Shared Key, which can have 8 to 63 characters. Then enter the Key Renewal Timeout, which instructs the device how often it should change the encryption keys."; hbh349="WPA2 Personal"; hbh3410="This method always set to AES encryption methods, with dynamic encryption keys. Enter the Shared Key, which can have 8 to 63 characters. Then enter the Key Renewal Timeout, which instructs the device how often it should change the encryption keys."; //hlp_ddns.htm hdh01="Help - DDNS"; hdh02="Use this feature to access the Wireless-G Internet Camera from a remote location."; hdh03="ATTENTION"; hdh04="- To complete the DDNS Service setup, port forwarding needs to be configured in your router. Click here to learn how to configure port forwarding on the Linksys Router -"; hdh05="http://www.linksys.com/portfwd"; hdh06="DDNS"; hdh061="(TZO, DynDNS, FreeDNS, or 3322)"; hdh07="DDNS Enable/Disable"; hdh08="Enable or disable the DDNS function, as required.
    Only enable this feature if you have registered for the DDNS Service with a DDNS Server provider."; hdh09="Web Site Button"; hdh10="Click this button to open a new window and connect to the Web site for the selected DDNS service provider."; hdh27="Host Name"; hdh28="Enter the host name (Domain Name) allocated to you by the DDNS Server provider."; hdh29="Account"; hdh30="Enter the login name for the DDNS account."; hdh31="Password"; hdh32="Enter the password for the DDNS account."; hdh33="Check WAN IP Address"; hdh34="Set the schedule for checking if the Internet IP address has changed. If the IP address has changed, the DDNS Server will be notified."; //hlp_ftp.htm hfh01="Help - Mail & FTP"; hfh02="FTP Alert"; hfh03="Enable FTP Upload"; hfh04="Check the box to enable the Primary/Secondary FTP Alerts feature."; hfh05="Enable Secondary FTP Alert"; hfh06="Check the box to upload to the secondary FTP if the camera can not connect to the primary FTP."; hfh07="FTP Server"; hfh08="Enter the address of the FTP Server to be used to upload FTP Alert."; hfh09="Port"; hfh10="Enter the Port of the FTP Server to be connected."; hfh11="Login name"; hfh12="Enter the Login name for the FTP server."; hfh13="Password"; hfh14="Enter the password for the FTP server."; hfh15="Photo"; hfh16="Enter the desired photo shot here."; hfh17="Passive mode"; hfh18="Check the box to enable the passive mode feature of the FTP server."; hfh19="File Path name"; hfh20="Enter the file path name for the FTP server when the passive mode is enabled."; hfh21="Upload interval"; hfh22="Select the desired option for the upload interval."; //hlp_image.htm hih01="Help - Audio/Video"; hih02="MPEG-4 Settings"; hih03="MJPEG Settings"; hih030="Fix Video Quality"; hih031="Select the desired fix quality. The default fix quality is set to Normal."; hih032="Max Frame Rate"; hih033="Select the desired frame rate. The default frame rate is set to 30 fps.
    Note: Higher frame rate requires more bandwidth."; hih04="Mobile Settings"; hih040="Enable Mobile Streaming"; hih041="Enable streaming video for the mobile device by checking this checkbox."; hih042="The default resolution is set to 160x120."; hih043="

    Note: Higher image quality requires more bandwidth."; hih044="Select the desired maximum frame rate. The default maximum frame rate is set to 15fps.  
    Note: Higher frame rate requires more bandwidth."; hih045="Access Code"; hih046="Set up your code for accessing the live video from camera through cell phone connection."; hih05="Resolution"; hih06="Select the desired video resolution format. The default resolution is set to 320×240."; hih07="Video Quality Control"; hih08="Fix bit rate: Select the desired fix bit rate. The default bit rate is set to 1.2 Mbps."; hih09="Fix quality: Select the desired fix quality. The default fix quality is set to Normal."; hih10="Note: Higher image quality requires more bandwidth."; hih11="Max Frame Rate"; hih12="Select the desired maximum frame rate. The default maximum frame rate is set to 30 fps.
    Note: Higher frame rate requires more bandwidth."; hih13="Power line frequency"; hih14="Select the power line frequency (50Hz or 60Hz) used in your region, to improve the picture quality under fluorescent lighting."; hih15="Adjustments"; hih16="Color Balance"; hih17="Select the desired option to match the current environment and lighting."; hih18="Exposure"; hih19="If necessary, you can adjust the exposure to obtain a better image. For example, if the camera is facing a bright light, the image may be too dark. In this case, you can increase the exposure."; hih20="Sharpness"; hih21="Select the desired option for the sharpness. You can select a Sharpness value between -3 and 3."; hih22="Options"; hih23="Flip Image"; hih24="Enable this feature if you want to rotate the image 180° on the vertical axis."; hih25="Mirror Image"; hih26="Enable this feature if you want to rotate the image 180° on the horizontal axis."; hih27="Microphone"; hih28="Enable microphone to receive audio by checking this checkbox. Using audio will increase the bandwidth requirements slightly."; hih29="Time Stamp"; hih30="Enable this feature by checking the checkbox. This will display the time on the video image."; hih31="Text Display"; hih32="If you want text to be displayed on the video image, enable this feature by checking the checkbox. You can enter text up to 20 characters in length. This feature is often used to identify the Camera when multiple Cameras are installed."; hih33="Enable Audio"; hih34="Enable audio by checking this checkbox."; hih35="Audio Option"; hih36="Select the desired audio option (for listen only, talk only, talk or listen - simultaneously, talk and listen - can be simultaneously) to match your demand."; hih37="Audio Type"; hih38="Select the desired audio type for valid compression."; hih39=" Speaker"; hih40="Enable speaker sound by checking this checkbox."; //hlp_opt.htm hoh01="Help - Motion Detection"; hoh02="Enable FTP Alert"; hoh03="If enabled, e-mails alert with attachment are sent when motion is detected."; hoh04="If enabled, FTP alert with attachment are sent when motion is detected."; hoh05="Send To"; hoh06="Enter at least one (1) e-mail address; the 2nd and 3rd addresses are optional. The e-mail alert will be sent to the e-mail address or addresses specified here."; hoh07='Show "From" as'; hoh08="Enter the e-mail address to be shown in the From field when the e-mail is received."; hoh09="Subject"; hoh10="Enter the desired text to be shown as the subject for the E-Mail when it is received. This text can not exceed 48 alphanumeric characters."; hoh11="SMTP Mail Server"; hoh12='Enter the address and port of the SMTP (Simple Mail Transport Protocol) server to be used to send E-Mail.
    If the SMTP Server requires a "login" in order to send mail, check the box next to My Mail Server Requires Authentication and enter your login name and password for the SMTP server. (This is usually the same as the POP3 server used to receive e-mail.)'; hoh13="Pan/Tilt"; hoh14="This option is only available if your camera is fitted with a Pan/Tilt control. If available, select the desired option to resolve conflict between the Pan/Tilt and Motion Detection features."; hoh15="Interval"; hoh16='Select the desired option for the events interval. (* "0 sec" = No Delay)'; hoh17="Attachment"; hoh18=""; hoh19="Set Area & Sensitivity Button"; hoh20="Click this button to enter the motion detection sub-screen. You can set the area or areas of the video image to be examined, and adjust the sensitivity of detection for each area.
    Note: Motion detection can be triggered by rapid changes in lighting condition, as well as by moving objects. For this reason, it should only be used indoors."; hoh21="Others"; hoh22="UPnP"; hoh23="If Enabled, the Wireless-G Internet Camera will broadcast its availability through UPnP. UPnP compatible systems such as Windows XP will then be able to detect the presence of the Wireless-G Internet Camera."; hoh24="Alternate Port"; hoh25="Enable/Disable
    If enabled, HTTP connections (from your Web Browser or the Viewer and Recorder utility) can use this port instead of port 80 (the standard HTTP port) to access the camera.
    If using your Web browser, you need to specify this port when you connect: 
    http://ip_address:port_number
    e.g. 
    http:/203.200.34.26:1024

    Port Number
    Enter the desired port, in the range 1024 to 65534. The default is 1024.
    If you already have a Web Server on your LAN, then you should enable the Alternate Port and use this port number instead of port 80."; hoh26="Check the box to upload to the secondary SMTP if the camera can not connect to the primary SMTP."; hoh27="Enable QoS Mode"; hoh28="Check to enable Quality of Service (QoS) for media streams."; hoh29="DSCP"; hoh30="If QoS is enabled, please enter the Differentiated Services Code Point (DSCP) to be used on processing QoS packets. The default value is 12."; //hlp_pan.htm hpth01="Help - Pan/Tilt"; hpth02="Set Preset"; hpth03="Set Positions"; hpth04="Set the desired position through adjusting the control panel."; hpth05="Calibration Button"; hpth06="Click this button to reset the calibration of Pan/Tilt area."; hpth07="Set Home Button"; hpth08="Set the desired position and then click this button to set Home position."; hpth09="Current Position"; hpth10='Name the current desired position and then click the "Add" button to add into the preset list.'; hpth11="Delete Preset Position"; hpth12="Select the preset position you don't need and then click the "Delete" button to remove."; hpth13="Pan/Tilt Control"; hpth14="Pan/Tilt Movement"; hpth15='Enable "On" if you want to use the Pan/Tilt Movement feature.'; hpth16="Default Home Position"; hpth17="Click this button to reset Default Home Position."; hpth18="Rotation Sequence"; hpth19="This feature determines how the camera will move when it is set to "Rotate". You can set a number of Preset Positions; the camera will go to the first position, then move through the list of preset positions until it is finished. The camera will stop at the last position in the list.
    To create the Preset Sequence, select the desired Preset Position in the left column, and click the "Add >>" button. Repeat until the desired sequence is complete. Note that you can add the same Preset Position more than once; this can be used to make the camera stay longer at one position.
    To delete a position from the Sequence, select the desired position and click the "Delete" button."; hpth20="Time"; hpth21="This determines how long the camera will stay at each position while executing the sequence. Set this to the desired value."; //hlp_pwd.htm hph01="Help - Maintenance"; hph02="Restore Factory Defaults"; hph03="Restore Defaults Button"; hph04="Click this button will reset the camera to it's factory default settings."; hph05="Restart"; hph06="Restart Button"; hph07="Click this button to restart the camera."; hph08="Firmware Upgrade"; hph09="Upgrade Firmware Button"; hph10="Click this button to upgrade the Firmware settings in the sub-screen."; hph11="Configuration"; hph12="Save Configuration Button"; hph13="Click this button to save the configuration file."; hph14="Upload Configuration Button"; hph15="Click this button to upload the configuration file."; hph16="Select the desired language mode and click the Change button to setup."; //hlp_status.htm hsh00="Help - Status"; hsh01="System"; hsh02="Firmware version"; hsh03="The version of the firmware currently installed is displayed.
    If you have downloaded a new Firmware Upgrade file, you can click the Upgrade Firmware button from the Help page.  Note: You must first be logged in to the Setup page as an administrator."; hsh04="MAC Address"; hsh05="This displays the current MAC Address of the Wireless-G Internet Video Camera."; hsh06="Camera Name"; hsh07="This shows the name of the Wireless-G Internet Camera."; hsh08="Description"; hsh09="This shows the description of the Wireless-G Internet Camera."; hsh10="Date/Time"; hsh11="Displayed here is the current date and time, according to the Wireless-G Internet Camera internal clock."; hsh12="Image"; hsh120="(MPEG-4 / MJPEG)"; hsh13="Resolution"; hsh14="This displays the image size of the video stream."; hsh15="Image Quality"; hsh16="This displays the image quality of the video stream."; hsh17="Frame Rate"; hsh18="This displays the frame rate of the video stream."; hsh19="Network"; hsh20="Network Type"; hsh21="Shown here is the Network Type used by the Wireless-G Internet Camera."; hsh22="IP Address"; hsh23="Shown here is the IP Address of the Wireless-G Internet Camera."; hsh24="Subnet Mask"; hsh25="Shown here is Subnet Mask for the above IP Address."; hsh26="Gateway"; hsh27="This is the IP Address of the Gateway used by the Wireless-G Internet Camera."; hsh28="Primacy DNS"; hsh29="The IP address of the primacy Domain Name Server."; hsh30="Secondary DNS"; hsh31="The IP address of the secondary Domain Name Server."; hsh32="Wireless"; hsh320="Signal Strength"; hsh321="This shows the wireless signal strength."; hsh33="SSID"; hsh34="This is the wireless SSID of the Wireless-G Internet Camera."; hsh35="Channel"; hsh36="This shows the wireless channel currently used."; hsh37="Security"; hsh38="This indicates whether wireless security is enabled or disabled."; hsh39="Syslog"; hsh40="Enable Syslog"; hsh41="Check the box to enable the Syslog feature."; hsh42="Syslog Server"; hsh43="Enter the address of the Syslog Server."; hsh44="Log"; hsh45="System Log"; hsh46="This displays system activities. Click the Clear Log button to erase all the entries in the System Log."; //hlp_user.htm huh01="Help - Users"; huh02="User List"; huh020="Click to enable authentication check which applies to all users."; huh03="User Name"; huh04="Enter the name for the user here. Spaces, punctuation, and special characters must NOT be used in the name."; huh05="The name is case insensitive (case is ignored), so you can not have 2 names which differ only by case."; huh06="User Password"; huh07="The password for the user."; huh08="Confirm Password"; huh09="Re-enter the password for the user, to ensure it is correct."; huh10="Pan/Tilt Control"; huh11="Click to allow user control PAN and TILT function."; huh12="Setup Control"; huh13="Click to authorize user control as an administrator."; huh14="Add and Delete Buttons"; huh15="Use the Add and Delete buttons to manage the user properties.";